Six washes at 60 °C, with a scoop of whatever detergent was on offer that week, and the graphic across the chest of a €52 tee already looks tired — while the cotton under it is barely broken in, and that gap is the annoying bit. The tee page at Fake Gods holds twelve of them, nearly all carrying a print or an embroidered mark somewhere, so laundry day decides more than the buying ever did.
Quick caveat first. I couldn’t find a fabric content or a wash symbol printed on the tee pages, so none of this is a quote from the shop — it’s just ordinary cotton-jersey care. There’s a label in your side seam and it beats anything written here.
The print is the weak point, not the cotton
Screen-printed ink sits on top of the fibers rather than soaking into them, so what wrecks it is mechanical and thermal — scrubbing, stretching, heat — and has almost nothing to do with how dirty the shirt was in the first place. A tee that goes in folded, inside out, on a short cold cycle comes out with its edges intact, whereas the same tee thrown in with jeans and towels takes a light sanding, every single time.
Embroidery catches people out in a different way. The stitching itself is tough enough, but the backing under it can pucker once the panel has been through a hot wash and then a hot drum, and a puckered panel stays puckered — there’s no fixing that one.
Heat does most of the cracking, if you want the short version. Hot water softens the ink film while the drum flexes it about, a dryer then bakes and flexes it again, and an iron sent straight over the print leaves a shiny patch that won’t wash back out.
Cold water, short cycle, inside out
Thirty degrees is plenty for a tee that got worn once in an office. Honestly, for anything short of a gym session, the cold program on a modern machine does it — most liquid detergents are built for 20–30 °C now, and the enzymes in them stop earning their keep much above 40 °C anyway.
Turn the tee inside out before it goes in. That one move puts the print against the garment instead of against the drum and the zip of whatever else is in the load. Then cut the detergent dose. Overdosing leaves a film that grays white cotton and stiffens a print, and in the hard tap water across much of inland Spain it builds up fast.
Fabric softener I’d leave out of it altogether. It coats the fibers so they feel slippery, which is more or less the opposite of what a printed panel wants, and on a boxy cotton tee you don’t really gain anything from it except a graphic that looks a shade duller than it did.
What the Spanish sun does to a wet tee
A balcony in Murcia in July is sort of a bleaching machine, if you think about what it’s doing. Direct sun on wet cotton lifts color out of a navy tee in an afternoon, and it yellows white ink on a dark one, and you tend to notice it first along the shoulder seams where the garment pulls tightest. So move the line into shade, and hang the tee inside out while you’re there. In 32 °C air it’ll still dry in under an hour.
Hangers are the other quiet problem. A heavy wet tee stretches at the shoulders, and the boxy cuts here already have a wide shoulder line. Lay them flat, or clip them up by the hem.
| Color group | Wash | Dry |
| Cream and white | 30 °C, low dose, no bleach or brightener | Shade, flat, inside out |
| Black and anthracite | Cold, short cycle, with dark cotton only | Shade, never the dryer |
| Navy and blue | 30 °C, first two washes alone | Shade, flat |
| Pink and brown | Cold, no softener | Shade, out of direct sun |
Color, and which of the twelve needs watching
The rail runs from a cream Gods Of Love tee through white, navy, anthracite, black, light gray, blue, pink and brown, and those two ends age in opposite directions. Pale ones go gray on you — detergent residue, plus every wash they share with the household load. Dark ones lose depth instead, and that’s mostly abrasion rather than anything the water did.
Which means the pale tees want cleaner washing (less detergent, no brighteners, their own load if you’ve got the patience), while the dark ones simply want less washing. A black tee worn for an evening doesn’t need a cycle. Air it overnight.
The first wash is the one that decides
Loose dye comes out at the start, and a navy or a deep brown tee can hand over a surprising amount of it in the first couple of washes, which is how a white tee ends up faintly blue and nobody can work out why. Give new dark pieces two solo cycles and then stop thinking about it. If you’re buying a pale one and a dark one together, just don’t introduce them to each other in the machine on day one.
Frequently Asked Questions
Can I put a printed tee in the dryer on low?
You can, and it’ll survive a few rounds of that, but low on a condenser dryer still runs warmer than a shaded line does here, and it’s the tumbling rather than the temperature that cracks ink. Given that air-drying costs nothing for most of the year in Spain, this is the one category where I’d break the dryer habit.
How do I get a deodorant mark out without scrubbing the print?
Work on the fabric and leave the graphic alone. A little detergent rubbed into the underarm with your fingers, twenty minutes sitting in cool water, then a normal cold cycle — that shifts most of it. Brushes anywhere near the printed panel, no.
Should I iron a boxy tee at all?
Mostly no, since cotton jersey off a shaded line drops its creases by itself and a boxy cut isn’t meant to look pressed anyway. If a fold has set in really hard, turn the shirt inside out and press the back of the panel on a cotton setting, keeping the steam away from the graphic.
Key Takeaways
|
A tee at this price sits in a strange middle — dear enough that you’d rather it lasted, cheap enough that it’s tempting to throw it in with the sheets and forget about it. Treat it as the printed garment it is and three years on it still looks like something you chose. Have a scroll through the twelve and see which color you’d keep reaching for.













