Every EV charging connector depends on a handful of metal pins. They carry the power, the ground and the control signals between the charger and the car. If a pin is made from the wrong alloy or plated too thinly, the connector runs hot, wears out early or fails inspection.
This guide is for engineers and buyers who source EV charger pins, inlets and connectors for chargers, charging cables and e-mobility products. It covers what to check before you choose a supplier, then ten manufacturers worth shortlisting, from global connector groups to specialist pin makers.
What to check before you choose an EV charger pin manufacturer
- Copper alloy and conductivity. Ask which copper alloy or brass grade the pin is made from, and ask for the conductivity figure. A cheaper alloy raises resistance, and resistance turns into heat at high current.
- Plating type and thickness. Silver plating is common on power pins because it keeps contact resistance low. Nickel is often used as an underlayer. Ask for the plating thickness in microns, not just the metal.
- Rated current and temperature rise. A rated current means little without a temperature-rise figure at that current. Ask for the test report at your working current, not only the headline maximum.
- Mating cycles. Public chargers are plugged in thousands of times. Ask for the tested mating-cycle figure and the contact resistance after cycling.
- Standard compatibility. North America uses SAE J1772 (Type 1), CCS1 and NACS (SAE J3400). The UK and Europe use IEC 62196 Type 2 for AC and CCS2 for DC. China uses GB/T. Confirm the standard on the drawing before you sample.
- Samples, MOQ and lead time. Ask for dimensional and electrical test reports with every sample batch. Confirm the minimum order quantity and the mass-production lead time in writing.
The 10 EV charger pin manufacturers
1. Promax Pogo Pin (Dongguan, China)
Promax Pogo Pin is a manufacturer of pogo pins, spring-loaded pins and connectors in Chang’an Town, Dongguan, manufacturing since 2014. Its EV charger pins are made from copper alloys and brass and plated with silver to reduce resistance and resist corrosion. The company lists current capacity of up to 60 A and describes the pins for both AC and DC charging. Its range covers pins for Type 1, Type 2, CCS, CHAdeMO and GB/T charging connectors.
Production runs in-house on CNC automatic lathes, with automatic pin assembly and testing machines. Promax makes custom pins to a buyer’s drawing, offers free samples and quotes mass production in 15 to 20 days. Its listed management systems include ISO 9001, ISO 14001, ISO 45001 and IECQ QC080000.
Best for: connector and cable makers who need custom-machined, silver-plated charger pins in small to mid volumes, with samples before a production order.
2. Phoenix Contact (Blomberg, Germany)
Phoenix Contact is an electrical engineering and automation company based in Blomberg, Germany. Its CHARX connect range covers vehicle charging inlets and charging cables for electric cars and utility vehicles. The company states that its universal CCS inlets comply with IEC 62196-2/-3, SAE J1772 and GB/T 20234, and support high-power charging at 375 kW.
Best for: vehicle and charger OEMs that want complete, certified inlets and cables rather than loose pins.
3. TE Connectivity
TE Connectivity is a global connector and sensor group. Its AMP+ Type 1 charging inlets are built to SAE J1772 for North America and Japan. Its CI 500 series covers CCS1 inlets for the Americas and CCS2 inlets for Europe, rated up to 500 A and 1,000 V DC.
Best for: automotive programmes that need high-power CCS inlets from a tier-one supplier.
4. Amphenol (Amphenol Industrial)
Amphenol is a global interconnect group. Its Amphenol Industrial ER Series covers SAE J1772 charging cables and inlets for Level 1 and Level 2 AC charging. Amphenol also lists CCS1 DC vehicle connectors rated at 250 A and 1,000 V DC.
Best for: North American charger builders who need J1772 and CCS1 connectors from one large supplier.
5. HUBER+SUHNER (Switzerland)
HUBER+SUHNER is a Swiss connectivity company. Its RADOX HPC500 is a liquid-cooled high-power charging cable system rated for 500 A continuous charging. The company lists it with CCS1, NACS, CCS2 and GB/T interfaces.
Best for: DC fast-charger makers that need liquid-cooled cables for high-power stations.
6. Zhejiang Yonggui Electric Equipment (Tiantai, China)
Yonggui is an electrical connector maker headquartered in Tiantai, Zhejiang, and listed on the Shenzhen Stock Exchange. Its vehicle and energy segment covers AC and DC charging guns, charging and battery-swapping interfaces, and wiring harnesses. It also makes liquid-cooled DC charging guns.
Best for: charger builders working on high-power DC and liquid-cooled charging projects.
7. JONHON (Luoyang, China)
JONHON (AVIC Jonhon Optronic Technology) is a large interconnect group headquartered in Luoyang. Its electric vehicle division supplies conductive charging connectors to Chinese, American and European standards, plus charging harnesses.
Best for: OEM programmes that want a large, established connector group behind the charging interface.
8. Workersbee (Suzhou, China)
Workersbee is the brand of Suzhou Yihang Electronic Science & Technology. It lists CCS1 and Type 1, CCS2 and Type 2, NACS and GB/T connectors. It also makes charging cables, portable EV chargers and charging adapters.
Best for: brands sourcing complete connectors and cables across both North American and European standards.
9. Shanghai Mida EV Power (Shanghai, China)
Mida EV Power is based in Fengxian District, Shanghai, and belongs to the MIDA Group. Its range includes CCS2 DC charging guns rated from 250 A to 350 A at 1,000 V DC, plus DC charging connectors for NACS and CCS1.
Best for: DC rapid-charger builders that need charging guns and matching cables from one group.
10. DEGSON (Ningbo, China)
DEGSON is an industrial connector maker headquartered in Cixi, Ningbo, best known for terminal blocks. Its electric vehicle range covers AC and DC charging cables, charging sockets and automotive high-voltage connectors.
Best for: buyers who already use DEGSON terminal blocks and want charging sockets and cables from the same supplier.
Comparison table
ExpandWideCopy table
| Promax Pogo Pin | Dongguan, China | Silver-plated EV charger pins up to 60 A, custom pins | Custom pins, small to mid volumes |
| Phoenix Contact | Blomberg, Germany | CHARX connect CCS inlets and charging cables | Complete certified inlets |
| TE Connectivity | Global | AMP+ Type 1 and CI 500 CCS1/CCS2 inlets | Tier-one automotive programmes |
| Amphenol | Global | ER Series J1772 cables and inlets, CCS1 connectors | North American AC and DC |
| HUBER+SUHNER | Switzerland | RADOX HPC500 liquid-cooled charging system | High-power DC stations |
| Yonggui | Tiantai, China | AC/DC charging guns, liquid-cooled DC guns | High-power DC projects |
| JONHON | Luoyang, China | Charging connectors to Chinese, US and EU standards | Large OEM programmes |
| Workersbee | Suzhou, China | Type 1, Type 2, CCS1, CCS2, NACS, GB/T connectors | Multi-standard connectors and cables |
| Mida EV Power | Shanghai, China | CCS2 DC guns 250–350 A, NACS and CCS1 connectors | DC rapid chargers |
| DEGSON | Ningbo, China | AC/DC charging cables and sockets | Sockets with terminal blocks |
How to choose between a connector group and a pin specialist
- Choose a connector group (Phoenix Contact, TE, Amphenol, HUBER+SUHNER) when you need a complete, certified inlet or cable and your volumes justify their pricing.
- Choose a pin specialist (such as Promax Pogo Pin) when you build your own connector housing and need the pins machined to your drawing, with custom alloys, plating or lengths.
- Choose a full-connector maker in China (Yonggui, Workersbee, Mida) when you want complete guns and cables at a lower unit cost and can run your own certification tests.
FAQ
What material are EV charger pins made from?
Most power pins are machined from copper alloy or brass, then plated with silver over nickel. The alloy sets conductivity, and the plating keeps contact resistance low over many mating cycles.
Which EV charger pins do I need for the US market?
For North America, build to SAE J1772 (Type 1) for AC, CCS1 for DC, and NACS (SAE J3400) for the newer Tesla-style connector. Confirm the standard and pin layout on the drawing before you order samples.
Can one supplier make pins for both US and European connectors?
Yes. Several manufacturers on this list make pins or connectors for Type 1, Type 2, CCS1 and CCS2. Ask for a separate drawing and test report for each standard.
What should I ask for with a sample order?
Ask for a dimensional report, a contact resistance figure and a temperature-rise test at your rated current. Ask for the mating-cycle test result too. Then test the samples in your own connector housing before you approve production.
Conclusion
The right EV charger pin manufacturer depends on whether you need complete certified connectors or custom pins for your own housing. Shortlist two or three suppliers from this list, compare test reports at your working current, and approve samples in your own product before a production order.













